|
Post by marcussheppard on Feb 6, 2019 19:55:46 GMT
Trying to make a carriage house with an opening logically large enough to accomodate a loaded ship carrier, but I can't seem to remove the lower row of wall panels without A) the game replacing the removed wall with a framing placeholder and B) preventing me from further construction once an exterior wall is missing. Any thoughts? Thanks!
|
|
tomservo
High Elder
VIP
Chief Seal Clubber
Posts: 1,070
|
Post by tomservo on Feb 6, 2019 20:28:00 GMT
If you are trying to make the arch 2 wide and 2 high it’s not possible but would be nice.
|
|
|
Post by kiviar on Feb 7, 2019 3:09:17 GMT
The ground floor must have a wall of some type on every exterior tile edge. On the other hand, every subsequent floor is not subject to this. So, you could build a ramp to the second floor and then have the 2x2 opening you want. For example.
|
|
|
Post by marcussheppard on Feb 7, 2019 15:21:04 GMT
That works! Thanks!
How is that done though, using a bridge?
|
|
|
Post by elfin on Feb 7, 2019 18:03:00 GMT
|
|
tomservo
High Elder
VIP
Chief Seal Clubber
Posts: 1,070
|
Post by tomservo on Feb 7, 2019 18:16:32 GMT
The ground floor must have a wall of some type on every exterior tile edge. On the other hand, every subsequent floor is not subject to this. So, you could build a ramp to the second floor and then have the 2x2 opening you want. For example.That is a great workaround!
|
|
|
Post by kiviar on Feb 7, 2019 20:04:13 GMT
|
|
|
Post by traveller on Feb 8, 2019 7:03:00 GMT
I did mine like this:
|
|